- peripheral devices
-
- 3-channel vacuum valves AG
- Fluide Air filtré 50 microns non lubrifié ; la lubrification si elle est utilisée devra être ininterrompue
Vide maximum 97 %
Température de fonctionnement -20 °C +40 °C
Temperature du fluide max +40 °C
Joint en dynamique polyuréthane
Joint statique NBR
Puissance bobines 11 VA 10 VA
Tension : 12 VCC / 24 VCC
24 VAC / 110 VAC / 220 VAC
- Vacuum regulator REV38
- Connected up to a vacuum pump or a venturi, the REV series vacuum re-gulator ensures an accurate and stable vacuum in a system. Its handwheelallows extremely fine adjustment.
- Angular grippers PA
- Angular jaw type clamps in series PAare widely used in robotics and plastic technology.In a more general context, they are used on all types of manipulator.They are especially recommended for injection moulding press unloading robots for parts or sprues.
- Vacuum feeders NVS/NVR
- The vacuum feeders in series NVS and NVR allow distribution of the vacuum in 4to 8 channels by a simple unit.
- Screwed vacuum fittings with O-ring RDV, RCOV, Y
- Gamme de raccords spéciaux étanches au vide, équipés d’un joint torique (bleu).
Etanchéité au vide à 100 % et meilleure étanchéité des circuits,
Démontables et remontables sans préparation du tube,
Raccords orientables pour une meilleure distribution du vide,
Matière : laiton nickelé.
- Standard screwed vacuum fittings RD, RC, RT, RU
- Range of standard vacuum-tight fittings.
Improved circuit sealing and a standard range,
Can be removed and reinstalled without requiring
preparation of the tubing,
Material: nickel-plated brass.
- Fittings RVM, RVF, RVT
- Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection.
- Soleenoid valve modules AP2, AP3
- The 2/2 and 3/2 solenoid modules in series AP2 and AP3 offer 2 possible electrical connections: DIN and M12.
They are designed for flows of 750Nl/min. Their compact, light-weight design means they can be placed close to the components they are controlling.
- Vacuum tubes
- Thanks to their rigid design and steel coil, they ensure that there is no pressure loss on the vacuum network.
- Clamps
- Accessory to be used for attaching TVR type pipes to guarantee perfect sealing
