Products / Coval - Vacuum managers

Foam Rings for VSA & VS Suction Cups, VSBM series
Applications
The foam ring is designed for gripping products with an uneven or ridged surface, e.g.
. Sawn wood, sheet metal, fl at surfaces with bumps or hollows.
. All granular surfaces to which suction cups cannot adhere correctly and therefore cannot be airtight.
Operating Characteristics of the Materials
• Nitrile (NBR - Black)
5 or 10mm thick, depending on the diameters of the suction cups. Good resistance to oil. The nitrile foam strip can only be bonded to nitrile suction cups.

• Silicone (SI - White)
2 or 5 mm thick, depending on the diameters of the suction cups. Heat-resistant up to 160°C, does not leave marks on products handled. Do not use the silicone foam strip for gripping products before painting or lacquering. The silicone foam strip can only be bonded onto silicone suction cups (bonding is guaranteed if it is carried out in the factory).

• Mounting
The foam rings are mounted by bonding. In all cases, this should be performed in our factory as we have the adhesives adapted to the materials. It is essential that bonding of silicone be carried out in the COVAL factory.
Branch-specific applications
Types of use
liens
Documentation
reference Diameter
ØA (mm)
C
C (mm)
Suction cup stroke
f (mm)
material
mat
VSBM20SI 20 2 1.0 Silicone
VSBM20SIF 20 2 1.0 Silicone FDA
VSBM25SI 25 2 1.0 Silicone
VSBM25SIF 25 2 1.0 Silicone FDA
VSBM32 32 5 2.5 Nitrile
VSBM32SI 32 2 1.0 Silicone
VSBM32SIF 32 2 1.0 Silicone FDA
VSBM42 42 5 2.5 Nitrile
VSBM42SI 42 5 2.5 Silicone
VSBM42SIF 42 5 2.5 Silicone FDA
VSBM53 53 10 5.0 Nitrile
VSBM53SI 53 5 2.5 Silicone
VSBM53SIF 53 5 2.5 Silicone FDA
VSBM62 62 10 5.0 Nitrile
VSBM62SI 62 5 2.5 Silicone
VSBM62SIF 62 5 2.5 Silicone FDA
VSBM78 78 10 5.0 Nitrile
VSBM78SI 78 5 2.5 Silicone
VSBM78SIF 78 5 2.5 Silicone FDA
VSBM88 88 10 5.0 Nitrile
VSBM88SI 88 5 2.5 Silicone
VSBM88SIF 88 5 2.5 Silicone FDA